Introduction
This guide will take you through the steps to install your LapSafe® ChargeLite™ Desk. For guidance on set up and use please refer to the User Manual supplied with your unit or at the link here: ChargeLite™ Desk User Manual
For users with old ClassBuddy™ branded models, this article still applies.
Tools Required
- Screwdriver/Power Driver
Weight
20kg
Process
Step 1: Stand Up
Once unpacked, stand the unit up and ensure you have a clear working space around all sides.
Step 2: Unscrew Rear Panel
On the rear of the ChargeLite™ desk there are 10 screws, unscrew all of these and store the screws and washers in a safe place.
Step 3: Disconnect Earth Cable
Slowly start to remove the rear panel to gain access to the connected earth cable. The cable should pull off of the rear panel.
For your safety, please ensure that you reconnect the earth lead when refitting the rear panel.
Step 4: Load Your Devices
You are now ready to load your devices. See the Charge Only Set Up section of the User Manual.
Securing to a Desk (Optional)
It is possible to secure your ChargeLite™ Desk down to the desk. To do so you will require 4 x M4 bolts (not included).
The drilling pattern is 392mm x 338mm but please allow at least 40mm from the rear of the desk.
Remove the feet fixing screws from the ChargeLite™ Desk and secure through the desk into the holes from the feet fixings. Retain the feet in order to maintain a ventilation gap.
Complete
Your new ChargeLite™ Desk should now be successfully installed and ready to use. Please refer to the User Manual that is supplied with your ChargeLite™ Desk, or the web manual here TODO for further information. Please read the Health and Safety guidance in the User Manual.
If you have any problems please do not hesitate to contact our support team.
Useful Links
|
Support Enquiries: |
|
|
Warranties:
Warranty Activation: www.lapsafe.com/activate
Warranty Details: www.lapsafe.com/warranty
|
|
|
Replacement Keys:
|
LapSafe® Self-Service Solutions Ltd
3 Wakes Hall Business Centre,
Wakes Colne, Colchester, Essex;
CO6 2DY